The City of Murray, Kentucky



Public Works

Home > Public Works > Utility Taps & Fees

Utility Taps & Fees


Natural Gas

$375 in the city limits
$500 in the county
$15 connect fee

Prices are for 100 feet of service and 100 feet of main; anything over 100 feet is $3 per foot extra.

Additional meter fee may apply to larger than standard gas loads.

Contact Murray Natural Gas with inquires.

Sanitary Sewer

$650 in the city limits
$900 in the county

For multi-unit buildings an extra charge of:
$250 for each additional unit within the same structure in the city limits
$350 for each additional unit within the same structure in the county

Note: In the event the cost to the city exceeds tap-on fees (water and/or sewer), a determination of the actual cost shall be made by the Director of Public Works and such cost shall be the responsibility of the water and sewer systems.

Please note: Sanitary sewer may not be available to all areas of the city and county. Also, annexation or deed restriction
requirements may apply to county residents.

Stormwater

Residential Flat Fee: $1.50 per single family dwelling (1 ERU) per month, and $1.50 per dwelling up to 5 dwellings per property.

Commercial: Billed based on square footage measurement at $1.50 per ERU, + $1.00 per ERU for additional area over and above 60,000 sq ft.

See Detailed Billing Information in the Stormwater Section

Water

0.75'' meter $500 in the city limits
1'' meter $600 in the city limits
1.5" meter $1,000 in the city limits
2" meter $1,350 in the city limits

0.75" meter $650 in the county
1'' meter $850 in the county
1.5" meter $1,400 in the county
2" meter $2,000 in the county

$15 connect fee. Any tap size larger than 2" will be billed at cost.

Please note:  Water service may not be available to all areas of the city and county. Also, annexation or deed restriction
requirements may apply to county residents.

*Downloadable Application*